MULTIMETALS
It is an ecological satin enamel, with a double function: anticorrosive and decorative. It can be applied directly on galvanized, aluminum, iron and bronze. It can also be applied on plastics, tiles, ceramics, PVC, fiber cement, tiles.USES AND FINISHES
It is for exterior and interior use. Before applying the product, make sure the surface is clean, dry, free of grease, dust and rust. Degrease the surface with soapy water or detergent. Rinse and dry very well.
In the presence of rust, remove loose parts if any, for this use a wire brush, sandpaper or sand the surface. Then apply Venier Oxide Converter, before applying Multimetales®.
On galvanized, sand to remove white rust. Wash with water and detergent, rinse with water and dry well. It is applied conventionally with a brush, roller or torch. Give the first coat and complete with a second coat after 2 hours without diluting.
The finish is satin. Its range of colors can be extended by mixing the different colors of Multimetales®.
In the presence of rust, remove loose parts if any, for this use a wire brush, sandpaper or sand the surface. Then apply Venier Oxide Converter, before applying Multimetales®.
On galvanized, sand to remove white rust. Wash with water and detergent, rinse with water and dry well. It is applied conventionally with a brush, roller or torch. Give the first coat and complete with a second coat after 2 hours without diluting.
The finish is satin. Its range of colors can be extended by mixing the different colors of Multimetales®.
DRYING
From 2 to 4 hours, depending on weather conditions.
Wait between 12 and 24 hours to apply the second coat.
Wait between 12 and 24 hours to apply the second coat.
PERFORMANCE
Yields approximately 15 m² per liter per coat, depending on the surface to be treated.
APP
Brush, roller, torch.
THINNER
Water. It is recommended not to dilute