lcp

Benjamin Moore Miramar Paint Center

LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
  • Load image into Gallery viewer, LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
  • Load image into Gallery viewer, LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
  • Load image into Gallery viewer, LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller
  • Load image into Gallery viewer, LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller

LED Dimmer for ProSelect Strip - 110V 6x10mm LEDs - LED Strip Light Controller

Vendor
Eco LED Lightings
Regular price
€56,95
Sale price
€56,95
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Illuminate with Brilliance - LED Strip Light Controller

Effortlessly light up your environment with our extensive 150FT LED Strip, offering vibrant and customizable lighting solutions. 

Seamless Control, Unmatched Convenience

Pairing seamlessly with the LED strip, our advanced dimmer controller ensures easy operation and precise lighting adjustments.

Installation Guide

Follow our step-by-step instructions for a hassle-free setup, from correct pin insertion to waterproof sealing, guaranteeing a secure and lasting connection.

  1. Prepare the Setup: Ensure the power to the strip light is disconnected or switched off to keep it inactive.

  2. Initiate Pairing: Press and hold the "+" button on the remote for 5 to 10 seconds while directing the signal light towards the controller.

  3. Continued Pressing and Power Connection: While still holding the "+" button, plug in the light's power cord. Keep the button pressed throughout this step.

  4. Indicator for Successful Pairing: Once the light begins flashing, it indicates the successful pairing with the remote. You can now use the remote to control the brightness.

  5. Troubleshooting Tips:

    • During step 2, ensure that you press and hold the "+" button for longer than 5 seconds, aiming the signal light towards the controller.
    • If the light doesn't flash after pairing, try the process several times to ensure accurate execution.

Package Include:

  • 1x RF remote (cell battery, not included)
  • 1x RF controller
  • 2x 2-prong pin
  • 1x 10-inch heat shrinkable tube
  1. Controller Capacity:

    • Each controller is designed to connect to a 150FT LED Strip Light. Ensure not to exceed this length to maintain optimal functionality.
  2. Dimmer Controller Installation:

    • Use the provided 2-prong pin during the installation of the dimmer's controller.
    • Insert the pin with the sharp side into the light, ensuring a secure fit, and place the round side into the corresponding round holes on the dimmer controller.
  3. Protection Against Water Damage:

    • Apply silicone glue to seal all connections securely.
    • To prevent water seepage, place all connection points, including the power cord side and end tail side of the strip light, indoors or within waterproof boxes.
    • This precautionary measure safeguards against moisture and ensures the longevity of the LED strip light system.

By following these steps, you'll ensure the proper installation and protection of your LED strip light system. Maintaining the recommended lengths and securing connections will help maintain functionality while guarding against water damage.